HI MR KIMATHI
I am repairing a LG DVD PLAYER MP3 AUX 3 BAND RADIO CASSETTE PLAYER so and so...
My first problem was the set was completely dead with no
life at all.
I found 5 volt regulator ic that was not working in power supply of the set by changing
this ic, The micro started to work and
set return to life but not completely.
The CD.DVD player start to show me on the screen “NO DISC”
ok according to the book I check the motors they were not bad.
I start to clean the
lens of the set now no disc error is gone and cd player start to work and say
is LOADING but after seconds stop working and remain on this mode...
If you can
help me what to do next I will be thank full of you
regards
beh
regards
beh
Hi Beh,
That is job well done, now the main suspect
could be the lens itself is weak.
Regards
Humphrey
HI HUMPHERY
do you mean I replace the lens? Let me tell you this, the spindle motor has 12 ohm by DMM and is rotating by analog ohm meter but not very fast, I suspect the motor more than lens.
beh
do you mean I replace the lens? Let me tell you this, the spindle motor has 12 ohm by DMM and is rotating by analog ohm meter but not very fast, I suspect the motor more than lens.
beh
Hi Beh
If the spindle motor is suspect then it should
take some time for the machine to say...***LOADING***around 2 minutes before
giving up.
But from what you say is that this symptom is instant...I mean the
machine begins to read and notices very fast that something is wrong.
Also if the inside of the lens has a foreign
object then it will behave as if the lens is faulty also...maybe cockroach has
gone in there and stained the inside of the lens.
Regards
Humphrey
Hi
Humphrey
………...I blow it with strong blower and now system is better and
cd player is working
and thanks for your suggestion s by the way do like I send you this repair as report?.....
and thanks for your suggestion s by the way do like I send you this repair as report?.....
Hi Beh,
Thanks for the success report. A good
gift for the new year.
Sure i would love to share it out loud to
other guys out there.
Bring it on
Regards Humphrey
Mr Beh later send me the pictures of this
repair as shown below…..
No comments:
Post a Comment