To do this test, be sure you have the screen voltage presence and the heater is lighted and HV is present.
Take
a resistor 12K by 3 watt (you can salvage this from an old CRT tube.
Solder
both ends on the resistor to a wire with crocodile clip as shown here below.
To
test if the tube is good or not just clip one end of this gadget you have just
made to the cold ground of the TV and the other end to each RGB cathode pins
separately.
If
you get all the three colors appear with the same intensity then you can
assume the tube is good.
If you want to learn more tricks like this consider investing in this e-book and don't forget to thank me later.
Good Tip Sir,
ReplyDeleteit is OK to try this trick while TV is already "ON" or first we have to connect this resister on testing point then turn TV "ON" ??.
Hi Panchal,
DeleteYes, should be live tests..one end is fixed on the cold ground and the other end moves between the test points(RGB)
Regards Humphrey
thanx Humphrey for this tip,so how do we regun or rejuvenate crt tube
ReplyDeletei have never done this but i hear it is possible
Delete